BS206 CNC precision automatic lathe_Hubei Yixing Smart Equipment Joint Stock Co.Ltd

　　● The back axis tool holder is equipped with Y axis rotation （BS206）， which realizes simultaneous machining of the back surface compound machining and the spindle side compound machining.

　　● According to the workpiece can choose synchronous guide sleeve / no guide sleeve device.

　　● Embedded power head （optional） for front/back eccentric hole machining.

　　● Equipped with new software to shorten the processing cycle, improve machining accuracy, and improve convenience.

　　● Improve the power head speed; the maximum speed can reach 8000min-1, shortening the processing cycle of small diameter holes.

　　● Adding the rapid override function, under the command of the cutting feed, can debug the machining program.

　　● Standard automatic programming software.

　　● Strengthen the rigidity of the bed and knife table and improve the cutting ability.

　　● Increase the maximum speed （Max.8,000min-1） of four horizontal power heads （standard）。

　　● Improve chip removal capacity.

　　Adopting Yixing proprietary chuck opening and closing structure to replace the traditional toggle, improving the roundness of the roundness，Selection of precision spindle bearings, stable cutting at high speeds, extended tool life，Improve surface light accuracy。Pursuit of Operational Standard Assemblies are suitable for small part parts, front and rear discharge dual-purpose workpiece separators, low investment in exchange for high yield, high returns, and overlapping processing to shorten the processing time. The back shaft and its special tool table can be used for front and back simultaneous machining.More advanced high-precision lathes （with no guide sleeve machine）， high precision, high-rigidity spindle bearings for front bearings, and high-speed spindles. The front bearing has the shortest distance from the cutting point, enabling ultra-high-precision machining. The maximum holding bar φ20.

	Item	BS206
Machining Range	Bar clamping diameter of spindle	Φ3~Φ20mm
	Max machined part length	215mm(80mm with Rotary guide sleeve)/45mm(without Guide sleeve）
	Max drilling diameter of spindle	Φ10mm
	Max tapping diameter of spindle	M10
	Max clamping diameter of back shaft	Φ20
	Max drilling diameter of back shaft	Φ8mm
	Max tapping diameter of back shaft	M6X1
	Max drilling depth of spindle	Φ6
	Transverse Max tapping diameter	M5x0.8
Machine capability	Spindle speed	200~10000min-1
	Back shaft speed	200~8000min-1
	Lathe tool quantity	25
	Tools size	12mmx12mmx85mm
	Fast reading movement speed	32m/min( Y1/X2/Z2 28m/min，X1/Y2 24m/min )
	Controllable axis number	6
Electric motor	Spindle	2.2/3.7kW
	Back shaft	0.75/1.5kW
	Y2	1.0kW
	X1、X2、Y1、Z1、Z2	1.0kW
	Power-driven tool	1.0kW
	Cutting oil pump	0.84kW
	Lubricating oil pump	0.1kW
Power*other	Machine weight	2300kg
	Total electrical capacity	11kVA
	Air pressure	0.5~0.7MPa
	Volume	30NL/min
	Cutting oil Tank volume	200L
	Machine dimension(LWH)	2480x1183x1756

关键词：

BS205 CNC precision automatic lathe

BY20B+C Gang tool type CNC lathe

关键词

BY25A Gang tool type CNC lathe

关键词

BY20C Gang tool type CNC lathe

关键词

BY20B Gang tool type CNC lathe

关键词

BS206 CNC precision automatic lathe

关键词

BS205 CNC precision automatic lathe

关键词

Items	BS206
NC UNIT	（MITSUBISHI）M80A
Controlled axis	6
AXIX	X1/X2/Y1/Y2/Z1/Z2
Minimum setting unit	0.001mm
Minimum movement unit	0.001mm
Maximum command value	±6digits
Interpolation	linear and circular ,conical,spiral
Rapid traverse	32m/min( Y1/X2/Z2 28m/min，X1/Y2 24m/min )
Cut feeding	1～10，000mm/min
OVR feeding	0～120%、10%/
Time-delay servo	G04 0～99999.99
ABS/INC instruction	X、Y、Z：absolute U、W：increments
Tool offset	±6
Tool offset sets	40
LCD/MDI	8.4″LCD
Language	Chinese （English）
Storage of programme	500KB
Programme quantity	800 both spindle and back shaft
Subsidiary function	M5
Spindle function	S5
Tool function	T13